Skip to content

http://www.osmanli-bohler.com/en/

Increase font size Decrease font size Default font size default color orange color green color
You are here:
W360 ISOBLOC
BÖHLER
GRADE
EN/DIN AISI C Si Mn Cr Mo Ni V W Co
W360
ISOBLOC
PATENT - 0,50 0,20 0,25 4,50 3,00 - 0,60 - -

Properties
BÖHLER W360 ISOBLOC was developed as tool steel for dies and punches in warm and hot forging. The steel     
can be used for a variety of applications where hardness and toughness are required.

  • High hardness (recommended in use: 52 – 57 HRc)
  • Exceptional toughness
  • Good thermal conductivity
  • Homogeneous microstructure
  • Can be cooled with water
  • High temper resistance


Applications and uses

  • Dies and punches in warm and hot forging
  • Tooling for high speed presses
  • Toughness-critical cold work applications
  • Extrusion tooling, e.g. dies
  • Core pins and inserts in die-casting dies
  • Specific applications in the plastic processing sector

 

For more information please download this document indir